Please select product options above to display Overview
2" length - 2" diameter, black, round, fascia mount single standoff, suits 8mm (5/16") to 12mm (1/2") glass in alloy 304 stainless steel, #4 satin finish.
Fascia mount solution for frameless glass railings
Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
Smooth beveled edges
Suits 8mm to 12mm glass
Supplied with UV resistant precision grip black silicone gaskets and grommet
Engineering Report
Meets AISI steel grade designation
Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
Install in pairs. Minimum four standoffs per panel required
Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
A rubber strap wrench (supplied by others) may be used to tighten the caps
Suggested fastener: 3/8"-16 thread (supplied by others)
Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.
1-1/2" length - 1-1/2" diameter, black, round, fascia mount single standoff, suits 8mm (5/16") to 12mm (1/2") glass in alloy 304 stainless steel, #4 satin finish.
Fascia mount solution for frameless glass railings
Black stainless steel offers a beautiful, durable, chip-free satin fnish that is scratch resistant
Smooth beveled edges
Supplied with UV resistant precision grip black silicone gaskets and grommet
Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
Install in pairs. Minimum four standoffs per panel required
Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
A rubber strap wrench (supplied by others) may be used to tighten the caps
Suggested fastener: 3/8"-16 thread (supplied by others)
Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.
1-1/2" length - 2" diameter, black, round, fascia mount single standoff, suits 10mm (3/8") to 12mm (1/2") glass in alloy 304 stainless steel, #4 satin finish.
Fascia mount solution for frameless glass railings
Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
Smooth beveled edges
Supplied with UV resistant precision grip black silicone gaskets and grommet
Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
Install in pairs. Minimum four standoffs per panel required
Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
A rubber strap wrench (supplied by others) may be used to tighten the caps
Suggested fastener: 3/8"-16 thread (supplied by others)
Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.
1" length - 1-1/2" diameter, black, round, fascia mount single standoff, suits 8mm (5/16") to 12mm (1/2") glass in alloy 304 stainless steel, #4 satin finish.
Fascia mount solution for frameless glass railings
Black stainless steel offers a beautiful, durable, chip-free satin fnish that is scratch resistant
Smooth beveled edges
Supplied with UV resistant precision grip black silicone gaskets and grommet
Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
Install in pairs. Minimum four standoffs per panel required
Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
A rubber strap wrench (supplied by others) may be used to tighten the caps
Suggested fastener: 3/8"-16 thread (supplied by others)
Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.
