Round, Fascia Mount Single Standoffs

• Fascia mount solution for frameless glass railings
• Black stainless steel offers a beautiful, durable, chip-free satin fnish that is scratch resistant
• Smooth beveled edges
• Supplied with UV resistant precision grip black silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Fascia mount solution for frameless glass railings
• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Smooth beveled edges
• Supplied with UV resistant precision grip black silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Smooth beveled edges
• Supplied with UV resistant precision grip clear silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

• Fascia mount solution for frameless glass railings
• Black stainless steel offers a beautiful, durable, chip-free satin fnish that is scratch resistant
• Smooth beveled edges
• Supplied with UV resistant precision grip black silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Fascia mount solution for frameless glass railings
• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Smooth beveled edges
• Suits 8mm to 12mm glass
• Supplied with UV resistant precision grip black silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 3/4" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: 3/8"-16 thread (supplied by others)

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.