Square, Pre-Drilled Posts, 8" and 10" Spacing

• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post is pre-drilled to accept glass clips with 8" and 10" spacing for center configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post is pre-drilled to accept glass clips with 8" and 10" spacing for end configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post pre-drilled to accept glass clips with 8" and 10" spacing for center configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post pre-drilled to accept glass clips with 8" and 10" spacing for end configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post is pre-drilled to accept glass clips with 8" and 10"spacing for corner configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post is pre-drilled to accept glass clips with 8" and 10" spacing for center configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post is pre-drilled to accept glass clips with 8" and 10" spacing for end configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post pre-drilled to accept glass clips with 8" and 10" spacing for corner configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post pre-drilled to accept glass clips with 8" and 10" spacing for center configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener

• Post wall thickness is 0.078" to accommodate top mount brackets and caps
• Post pre-drilled to accept glass clips with 8" and 10" spacing for end configurations
• Durable double welded machined anchor plate
• Satin finish, low profile anchor plate with laser-welded top seam and flush anchor holes creates a clean look making a cover flange optional
• The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings
• Use Bezdan approved Loctite 680 quick‑bonding adhesive with fittings to reduce installation time
• Test report and engineering report
• Meets ASTM A554 standard
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Suggested fastener: Anchor to surface, part #9940; Glass clips to post, part #9936, #9938 or 5/16"-18 coarse thread fastener