Fascia Mount Adjustable Single Standoffs

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railings
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip clear silicone gaskets
• The glass size upper limit cannot be exceeded
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fastener: Indoor: part #9944,#9946, Outdoor: part #9945,#9947

• Adjustable fascia mount solution for frameless glass railing
• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Suits 8mm to 21.52mm glass
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip black silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 304 for indoor/limited outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fasteners: Indoor: part #9944 and #9946, Outdoor: part #9945 and #9947

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.

• Adjustable fascia mount solution for frameless glass railing
• Black stainless steel offers a beautiful, durable, chip-free satin finish that is scratch resistant
• Suits 8mm to 21.52mm glass
• Smooth beveled edges
• Hexagon socket in body effectively enables adjustments of the mounted glass
• Removable base for easier installation
• Align glass panels while mounted, no shims required
• Oval hole in base allows precise adjustments on fascia
• Supplied with UV resistant precision grip black silicone gaskets and grommet
• Engineering Report
• Meets AISI steel grade designation
• Alloy 316 for indoor/outdoor use (refer to the metal usage guide)
• Install in pairs. Minimum four standoffs per panel required
• Pre-drill a ø 1.02" hole in glass for grommet and fastener. Drill hole can't exceed ø 1.02"
• A rubber strap wrench (supplied by others) may be used to tighten the caps
• Suggested fasteners: Indoor: part #9944 and #9946, Outdoor: part #9945 and #9947

Clean PVD or colored stainless products using a soft cloth or damp sponge with mild soap and water, then buff dry to avoid water deposits. Do not use cleaners containing ammonia, bleach or acid or caustic agents. Avoid abrasive cleaners and brushes.